Image unavailable
18Adeg Chamfer Cutter - 18 Chamfer Cutter For .38 Caliber
Our editorial team reviews specifications, product data, and field-use information to keep pages accurate.
$59.99
View on Brownells
You'll be taken to Brownells to complete your purchase.
Hunter's Outpost earns a commission from affiliate links at no extra cost to you.
SKU: 080486300
Overview
This standard chamfer cutter is designed for shooters working on .38 caliber applications, with use extending from 9mm through .41 according to the product notes. It is intended to be used without a lathe and without removing the barrel from the frame, which makes it practical for shop work where setup time matters. The cutter angle is suited for jacketed bullets as well as round nose and semi-wadcutter lead bullets, and it is described as removing most factory cuts without exceeding the maximum recommended throat diameter or creating a compound angle. For hunters and serious handgun users who want a straightforward chamber-throat tool from Brownells, this is a purpose-built option for controlled, specific work rather than a general-purpose cutter.
Why Hunters Choose the Brownells
No Lathe
Needed for use
No Need
To remove the barrel from
Standard Cutter
Designed for common chamber work
Suitable Jacketed,
Round nose, and semi-wadcutter lead
Helps Remove
Most factory cuts without exceeding
Key Features
- Standard chamfer cutter for .38 caliber applications.
- No lathe needed for use.
- No need to remove the barrel from the frame.
- Angle suits jacketed bullets, round nose, and semi-wadcutter lead bullets.
- Removes most factory cuts without exceeding the maximum recommended throat diameter.
- Designed for 9mm through .41 when using the .38 cutter.
Best Used For
- Handloaders working on 9mm through .41 caliber revolver throats
- Users wanting to remove factory cuts without removing the barrel from the frame
- Shooters loading jacketed bullets, round nose, or semi-wadcutter lead bullets
- Owners seeking a standard chamfer cutter for .38 caliber applications
Specifications
| Angle | 18 degrees |
|---|---|
| Caliber | .38 caliber |
| Feature | No lathe needed |
| Feature 2 | No need to remove barrel from frame |
| Feature 3 | Removes most factory cuts without exceeding the maximum recommended throat diameter or creating a compound angle |
| Recommended Use | Jacketed bullets, round nose bullets, semi-wadcutter lead bullets |
| Use With | 9mm through .41 |
Pros
- No lathe needed for use
- No need to remove the barrel from the frame
- Standard cutter designed for common chamber work
- Suitable for jacketed, round nose, and semi-wadcutter lead bullets
- Helps remove most factory cuts without exceeding the recommended throat diameter
- Sized for .38 caliber applications, covering 9mm through .41
Considerations & Trade-offs
- Designed for .38 caliber use, so it is not the right choice for larger bores outside the stated 9mm through .41 range.
- It is described as the "standard" cutter, which means it is aimed at general use rather than specialized throat-cutting applications.
- The product is intended to remove most factory cuts, but results are limited by the existing barrel throat condition and the need to stay within the maximum recommended throat diameter.
- The description notes that the angle is suitable for jacketed bullets and round nose or semi-wadcutter lead bullets, so it may not be the best fit for every bullet profile.
Suggested Comparisons
- Muzzle crown cutters
- Barrel maintenance tools
- Handgun gunsmithing tools
- Chamber and throat reaming tools
Suggested Accessories
- Chamfer gauge
- Cleaning rod
- Bore brush
- Cutting lubricant
Frequently Asked Questions
What is this 18° chamfer cutter used for?
It is a standard chamfer cutter intended for .38 caliber applications, and the description says the angle is suitable for jacketed bullets as well as round nose and semi-wadcutter lead bullets.
Do I need a lathe to use this cutter?
No. The short description states that no lathe is needed.
Do I need to remove the barrel from the frame before using it?
No. The short description says there is no need to remove the barrel from the frame.
What calibers does the .38 cutter cover?
The long description says to use the .38 cutter for 9mm through .41.
Will this cutter remove factory cuts?
The long description says it will remove most factory cuts without exceeding the maximum recommended throat diameter or creating a compound angle.