Bolt Action Firing Pin Removal Tool - Firing Pin Removal Tool

Overview

A third hand for removing the firing pin from Remington and RugerA(R) bolt action rifles without lost parts or sore fingers that sometimes accompany this tricky job. Install the correct bushing for your rifle in the end of the tool body. Screw the firing pin assembly into the bushing, and tighten the threaded, steel shank to compress and capture the mainspring. The hollow shank protects the firing pin tip as it slides over the pin to compress the spring. The crosspin can then be driven out with a punch, and the spring tension relieved by gradually loosening the shank. Includes bushings for Remington 700 family and Ruger M77A(R) Mark II rifles. Built-in storage slot holds the unused bush Mfg: Brownells SPECS: Aluminum base, hardcoat anodized, black. Hardened tool steel screw shank and bushings, black oxide finish. Body - 5A 1/4" (13.34cm) long, 1" (2.54cm) wide, 1-3/16" (3.02cm) high. Shank - 3A 1/2" (8.89cm) long. Fits Remington 700, 710, 721, 722, Mode