Image unavailable
Bore Stix - 7mm-30 Cal. 36''''
Our editorial team reviews specifications, product data, and field-use information to keep pages accurate.
$71.99
View on Brownells
You'll be taken to Brownells to complete your purchase.
Hunter's Outpost earns a commission from affiliate links at no extra cost to you.
SKU: 509000010
Overview
Designed for hunters and rifle owners who want a careful cleaning setup, this coated rod is built to help maintain bore condition without unnecessary abrasion. The cushioned handle uses ball bearings for smooth rotation, allowing the patch to track the rifling more naturally during cleaning. Index dots on the handle provide a simple way to check twist rates, adding a practical reference point at the bench. It is a straightforward choice for routine maintenance of compatible 7mm to .30 caliber rifles, with the trade-off that it is a specialized cleaning tool rather than a general-purpose rod.
Why Hunters Choose the Bore Tech
Fully Coated
Rod helps clean without scratching
Cushioned Handle
22 ball bearings
Patch Follows
Rifling more consistently during cleaning
Index Dots
On the handle help check
Epoxy-coated Spring
Steel rod is solvent resistant
Key Features
- Fully coated rod cleans without scratching.
- Cushioned handle uses 22 ball bearings for smooth rotation.
- Patch follows rifling during cleaning.
- Full-length epoxy coating is impervious to solvents.
- Index dots on the handle help check twist rates.
- Spring steel rod with 8-32 female threads.
Best Used For
- Hunters who want a coated cleaning rod that helps reduce scratching during routine bore maintenance.
- Shooters using 7mm to .30 caliber rifles who need a rod suited to common hunting and varmint setups.
- Owners who prefer a cushioned handle with smooth rotation for easier patch tracking through rifling.
- Users who want visible index dots to help check twist rates during cleaning and setup.
- Rifle owners seeking a solvent-resistant cleaning rod for regular bench, range, or field maintenance.
Specifications
| Ball Bearings | 22 |
|---|---|
| Caliber | 7mm-30 Cal. |
| Coating | Full-length epoxy coating |
| Handle | cushioned handle |
| Handle Diameter | 11/8" (2.9cm) |
| Handle Length | 5" (12.7cm) |
| Index Dots | present |
| Rod Length | 36" |
| Rod Material | spring steel |
| Solvent Resistance | impervious to solvents |
| Thread Size | 8-32 female threads |
| Twist Rate Indicator | present |
Pros
- Fully coated rod helps clean without scratching the bore
- Cushioned handle supports smooth rotation with 22 ball bearings
- Patch follows rifling more consistently during cleaning
- Index dots on the handle help check twist rates
- Epoxy-coated spring steel rod is solvent resistant
- 8-32 female threads provide standard accessory compatibility
Considerations & Trade-offs
- The 36" rod length may be more than needed for shorter rifles or compact cleaning setups.
- The product is a coated cleaning rod, so it is designed for use with compatible threaded accessories rather than as a complete cleaning system by itself.
- Thread compatibility is specific: the listed 8-32 female threads apply here, while .17 cal. and .20 cal. rods use 5-40 female threads.
- The handle and rod design are focused on controlled patch guidance and solvent use, which may make it less suited to users looking for a very simple, minimal cleaning rod.
Suggested Comparisons
- One-piece coated cleaning rods
- Bore guides
- Cleaning jags and patch holders
- Gun cleaning kits
Suggested Accessories
- Cleaning patches
- Bore guide
- Gun cleaning solvent
- Thread adapter
Frequently Asked Questions
What calibers is this Bore Stix rod intended for?
The title identifies it as a 7mm-30 cal. rod. The long description also notes that Bore Tech offers a separate 6mm BR rod for 6mm benchrest, varmint, and hunting rifles.
Does the rod have a coated surface?
Yes. The short description says it is fully coated to clean without scratching, and the long description says it has a full-length epoxy coating on the spring steel rod.
What thread size does this rod use?
The listed specification is 8-32 female threads. The description also notes that .17 cal. and .20 cal. rods use 5-40 female threads.
How does the handle help with cleaning?
The cushioned handle contains 22 ball bearings for rotation, which is described as helping the patch follow the rifling. The handle also has index dots for checking twist rates.
What are the handle dimensions?
The provided specs list the handle as 1 1/8 inches in diameter and 5 inches long.