Image unavailable
Felt Polishing Wheels - 6'''' Hard Felt Polishing Wheel 1'''' Arbor
Our editorial team reviews specifications, product data, and field-use information to keep pages accurate.
$54.99
View on Brownells
You'll be taken to Brownells to complete your purchase.
Hunter's Outpost earns a commission from affiliate links at no extra cost to you.
SKU: 088261001
Overview
Designed for controlled finishing work, this hard felt polishing wheel is suited to gunsmithing tasks where a consistent polish matters. The wheel is carefully selected and factory trued, with the note that final touch-up truing may still be needed before use. It is intended for use with the appropriate polish grit, and the included instructions emphasize using a separate wheel for each grit to help keep finishing steps organized. With its 1-inch arbor and included adapter, it offers a practical setup for users working within the recommended speed and horsepower ranges.
Why Hunters Choose the Bacon Felt Company
Finest Quality
1-inch wide felt wheel for
Factory Trued
Final touch-up truing possibly needed
Closely Controlled
Felt density supports a professional-quality
Includes Complete
Polish-O-Ray tube instructions for felt
One Adapter
Each wheel for multiple arbor
Key Features
- 6-inch hard felt polishing wheel for gunsmithing and polishing work.
- Factory trued, with final touch-up truing possibly required.
- Closely controlled felt density is designed for a refined finish.
- Use a different wheel for each polish grit when possible.
- Includes one adapter; additional adapters convert to multiple arbor sizes.
- All wheels are 1 inch thick with a 1 inch arbor.
Best Used For
- Gunsmiths needing a 6-inch hard felt wheel for controlled polishing work
- Users maintaining separate wheels for different polish grits during finishing
- Shop owners with 1/2 hp or smaller motors running 6-inch wheels at 3600 RPM
- Experienced polishers using adapter-supported arbor setups for bench equipment
Specifications
| Adapter Included | One adapter supplied with each wheel |
|---|---|
| Adapter Sizes | 1/2 in (12.7 mm), 5/8 in (15.9 mm), 3/4 in (6.4 mm), 7/8 in (22.2 mm) |
| Arbor Size | 1 in (2.5 cm) |
| Experience Note | 10 in for experienced polishers only |
| Factory Trued | Yes |
| Final Touch Up Truing Required | May be required |
| Instructions Included | Polish-O-Ray(TM) tube describes felt wheel technique |
| Recommended Rpm 12 Hp Or Over | 8 in wheels at 1800 RPM |
| Recommended Rpm 12 Hp Or Under | 6 in wheels at 3600 RPM |
| Recommended Rpm 34 Hp Or Over | 10 in wheels at 1800 RPM |
| Recommended Use | Use the soft felt for most work, medium or hard wheel for 555(TM) Polish |
| Thickness | 1 in (2.5 cm) |
| Wheel Diameter | 6 in |
| Wheel Type | Hard Felt Polishing Wheel |
| Wheel Width | 1 in |
Pros
- Finest quality 1-inch wide felt wheel for polishing applications
- Factory trued for improved setup, with final touch-up truing possibly needed
- Closely controlled felt density supports a professional-quality finish
- Includes complete Polish-O-Ray tube instructions for felt wheel technique
- One adapter supplied with each wheel for multiple arbor sizes
- Available in hard felt for use with 555(TM) Polish
Considerations & Trade-offs
- Final touch-up truing may be required even though the wheel is factory trued.
- The 1" width and arbor size mean compatibility depends on your setup; adapters are included, but you may still need to confirm fit before use.
- The instructions call for matching wheel type and polish grit, so a separate wheel for each grit is recommended rather than using one wheel for all stages.
- Speed guidance varies by motor size and wheel diameter, so this is best used with attention to the specified RPM ranges.
Suggested Comparisons
- Polishing wheels
- Gunsmithing polishing supplies
- Bench grinder accessories
- Abrasive finishing accessories
Suggested Accessories
- Polishing compound
- Bench grinder accessories
- Arbor adapters
- Shop safety gear
Frequently Asked Questions
What size is this felt polishing wheel?
The wheel is 6 inches in diameter and 1 inch thick, with a 1 inch arbor.
What arbor sizes can it fit?
It is made with a 1 inch arbor, and adapters are available to convert it to 1/2 inch, 5/8 inch, 3/4 inch, and 7/8 inch. One adapter is supplied with each wheel.
Is this wheel ready to use as-is?
The wheel is factory trued, but the description notes that final touch-up truing may be required.
What speed should it be run at?
The provided instructions say that 6 inch wheels should be used at 3600 RPM on 1/2 hp or under machines.
Which type of felt wheel should be used for different polishing work?
The description says to use soft felt for most work, and medium or hard wheels for 555(TM) Polish. It also recommends using a different wheel for each polish grit.