Image unavailable
M-Brace Scope Mounts - 30mm 1.50'''' 20 Moa Scope Mount Black
Our editorial team reviews specifications, product data, and field-use information to keep pages accurate.
$279.00
View on Brownells
You'll be taken to Brownells to complete your purchase.
Hunter's Outpost earns a commission from affiliate links at no extra cost to you.
SKU: 100050410
Overview
Built for mounting a 30mm scope on a Picatinny rail, this scope mount system is aimed at riflemen who want a purpose-driven setup rather than a generic accessory. It carries a 20 MOA cant, making it suited to optics setups where additional elevation adjustment is part of the plan. The design is presented as an evolution of ARC’s M10 Scope Rings, and the included note about bolt-handle clearance on some 90-degree actions is worth checking during installation. Torque on the scope clamp is specified at 6.2 Nm (55 in-lbs), so careful setup is important.
Why Hunters Choose the American Rifle Company
30mm Scope
Mount size fits compatible 30mm
20 Moa
Cant supports long-range elevation setup
Black Finish
Low-profile, subdued appearance
Torque Specification
Is clearly provided for scope
Designed American
Rifle Company for the M-BRACE
Key Features
- 30mm scope mount in black finish
- 1.50-inch height with 20 MOA cant
- M-BRACE Scope Mounting System from American Rifle Company
- Uses a serrated interface block for rail attachment
- Scope clamp torque specification: 6.2 Nm (55 in-lbs)
- May require forward rail placement on some 90-degree bolt actions
Best Used For
- Hunters mounting a 30mm scope on a rifle with a Picatinny rail
- Shooters needing a 20 MOA mount for longer-range optic setup
- Riflemen who want a fixed-height 1.50-inch scope mounting solution
- Users comfortable checking bolt-handle clearance on 90-degree bolt actions
Specifications
| Cant | 20 MOA |
|---|---|
| Color | Black |
| Compatibility Note | When attached to the far aft recoil slot in the picatinny rail on an action with 90 degree bolt rotation, the 32mm height M-BRACE serrated interface block may interfere with the bolt handle when opened. This issue can usually be avoided by moving the mount forward 1 slot in the picatinny rail. |
| Country Of Origin | American Rifle Company |
| Height | 1.50 in |
| Mount Tube Diameter | 30mm |
| Torque Spec | 6.2 Nm (55 in-lbs) on scope clamp |
Pros
- 30mm scope mount size fits compatible 30mm optics.
- 20 MOA cant supports long-range elevation setup.
- Black finish offers a low-profile, subdued appearance.
- Torque specification is clearly provided for scope clamp installation.
- Designed by American Rifle Company for the M-BRACE mounting system.
Considerations & Trade-offs
- The 1.50" height and 20 MOA cant make this a specialized setup, so it may not suit rifles that need a lower or non-canted mount configuration.
- The product note calls out a potential bolt-handle interference issue on some actions with 90 degree bolt rotation when mounted in the far aft recoil slot; placement may need adjustment.
- Scope clamp torque is specified at 6.2 Nm (55 in-lbs), so installation should be done carefully to stay within the stated spec.
- As a dedicated mounting system from American Rifle Company, it is more purpose-built than a general-purpose ring set, which may be more than some hunters need for simpler optics setups.
Suggested Comparisons
- Scope rings and mounts
- Picatinny rail accessories
- Precision rifle optics mounting systems
Suggested Accessories
- Picatinny rail section
- Scope level
- Torque wrench
- Lens cleaning kit
Frequently Asked Questions
What tube size does this M-BRACE scope mount fit?
The product title specifies a 30mm scope mount.
What cant is built into this mount?
The title lists this as a 20 MOA scope mount.
What color is the mount?
The product title identifies it as black.
Is there any bolt-handle clearance note I should know before mounting it?
Yes. The source notes that on an action with 90 degree bolt rotation, the 32mm height M-BRACE serrated interface block may interfere with the bolt handle when opened if mounted in the far aft recoil slot. Moving the mount forward one slot in the Picatinny rail can usually avoid that issue.
What torque spec is provided for the scope clamp?
The listed torque spec is 6.2 Nm, or 55 in-lbs, on the scope clamp.