Image unavailable
M-Brace Scope Mounts - 34mm 1.50'''' 0 Moa Scope Mount Black
Our editorial team reviews specifications, product data, and field-use information to keep pages accurate.
$299.00
View on Brownells
You'll be taken to Brownells to complete your purchase.
Hunter's Outpost earns a commission from affiliate links at no extra cost to you.
SKU: 100050417
Overview
Built for mounting a 34mm scope on a rifle with a 1.50-inch height and 0 MOA cant, this scope mount is aimed at shooters who want a straightforward, purpose-built setup for the range or the field. It is presented as part of American Rifle Company’s M-BRACE mounting system, developed from the company’s M10 scope rings. The provided notes also call out a potential bolt-handle clearance issue on some actions with 90-degree bolt rotation when the mount is placed in the far aft recoil slot, so placement on the rail may need attention. Torque for the scope clamp is specified at 6.2 Nm (55 in-lbs).
Why Hunters Choose the American Rifle Company
34mm Scope
Mount configuration suits compatible large-tube
0 Moa
Design supports a level mounting
1.50-inch Height
Specific fit option for scope
Torque Specification
Is clearly provided at 6.2
American Rifle
Company M-BRACE system builds on
Key Features
- 34mm scope mount for Picatinny rail use
- 0 MOA cant for a level optic setup
- 1.50-inch height configuration
- Scope clamp torque spec: 6.2 Nm (55 in-lbs)
- Made by American Rifle Company
- Note: rear-slot placement may interfere with some 90-degree bolt actions
Best Used For
- Hunters mounting a 34mm scope on a rifle with Picatinny rail and 0 MOA setup
- Riflemen wanting a scope mount from American Rifle Company for a dedicated hunting or precision build
- Users who can verify bolt-handle clearance before final installation on 90-degree bolt actions
- Shooters following a specified 6.2 Nm scope-clamp torque requirement during setup
Specifications
| Color | Black |
|---|---|
| Moa | 0 |
| Mount Height | 1.50 in |
| Note | When attached to the far aft recoil slot in the picatinny rail on an action with 90 degree bolt rotation, the 32mm height M-BRACE serrated interface block may interfere with the bolt handle when opened. This issue can usually be avoided by moving the mount forward 1 slot in the picatinny rail. |
| Scope Tube Diameter | 34mm |
| Torque Spec | 6.2 Nm (55 in-lbs) on scope clamp |
Pros
- 34mm scope mount configuration suits compatible large-tube optics.
- 0 MOA design supports a level mounting setup on the rifle.
- 1.50-inch height provides a specific fit option for scope clearance needs.
- Torque specification is clearly provided at 6.2 Nm (55 in-lbs).
- American Rifle Company M-BRACE system builds on the established M10 Scope Rings design.
Considerations & Trade-offs
- The 34mm ring size limits use to compatible 34mm scope tubes.
- At 1.50" height, fit and cheek weld will depend on rifle, optic, and mounting setup.
- The 0 MOA base is a neutral option, so it does not add built-in elevation for longer-range dialing.
- The note about 90-degree bolt rotation means placement may need adjustment on some actions to avoid bolt-handle interference.
Suggested Comparisons
- Scope rings
- One-piece scope mounts
- Picatinny rail accessories
Suggested Accessories
- Scope level
- Torque wrench
- Picatinny rail cover
- Lens cleaning kit
Frequently Asked Questions
What tube size does this M-BRACE scope mount fit?
This listing identifies the mount as a 34mm scope mount.
What height and cant are listed for this mount?
The product title lists it as 1.50" and 0 MOA.
Is there any bolt-handle clearance note I should know about?
Yes. The product notes that when the mount is attached to the far aft recoil slot on a Picatinny rail with a 90-degree bolt rotation, the serrated interface block may interfere with the bolt handle when opened. Moving the mount forward one slot may avoid this.
What torque spec is provided for installation?
The listed torque spec is 6.2 Nm, or 55 in-lbs, on the scope clamp.
Who makes this scope mount?
The manufacturer listed is American Rifle Company.