Image unavailable
M-Brace Scope Mounts - 36mm 1.50'''' 20 Moa Scope Mount Black
Our editorial team reviews specifications, product data, and field-use information to keep pages accurate.
$279.00
View on Brownells
You'll be taken to Brownells to complete your purchase.
Hunter's Outpost earns a commission from affiliate links at no extra cost to you.
SKU: 100050435
Overview
Built for mounting a 36mm scope on a Picatinny rail, this American Rifle Company scope mount is aimed at hunters and riflemen who want a purpose-driven setup rather than a general-purpose accessory. It carries a 20 MOA cant, making it suited to rifles configured for longer-range dialing, while the 1.50-inch height provides a specific fit profile that should be checked against your optic and bolt clearance. The design note about possible interference on actions with 90-degree bolt rotation is worth considering during installation, especially when placing the mount at the far aft recoil slot. Torque on the scope clamp is specified at 6.2 Nm (55 in-lbs), so careful setup is part of getting the most from it.
Why Hunters Choose the American Rifle Company
36mm Scope
1.50-inch height and 20 MOA
Part Arc’s
M-BRACE Scope Mounting System
Designed As
Evolution from ARC’s M10 Scope
Torque Specification
Provided for scope clamp installation
Black Finish
For a subdued rifle setup
Key Features
- M-BRACE scope mounting system from American Rifle Company
- 36mm scope mount with 1.50-inch height
- 20 MOA cant for scope mounting setup
- Black finish
- Torque spec: 6.2 Nm (55 in-lbs) on scope clamp
- May require moving forward one Picatinny slot on some 90-degree bolt actions
Best Used For
- Hunters mounting a 36mm scope on a rifle with Picatinny rail compatibility
- Shooters wanting a 1.50-inch, 20 MOA scope mount for long-range setup
- Users who prefer a mounting system from American Rifle Company
- Rifle owners needing to check bolt-handle clearance on 90-degree bolt actions
Specifications
| Cant | 20 MOA |
|---|---|
| Color | Black |
| Compatibility Note | When attached to the far aft recoil slot in the picatinny rail on an action with 90 degree bolt rotation, the 32mm height M-BRACE serrated interface block may interfere with the bolt handle when opened. This issue can usually be avoided by moving the mount forward 1 slot in the picatinny rail. |
| Country Of Origin | American Rifle Company |
| Height | 1.50 in |
| Mount Tube Diameter | 36mm |
| Torque Spec | 6.2 Nm (55 in-lbs) on scope clamp |
Pros
- 36mm scope mount with 1.50-inch height and 20 MOA cant
- Part of ARC’s M-BRACE Scope Mounting System
- Designed as an evolution from ARC’s M10 Scope Rings
- Torque specification provided for scope clamp installation
- Black finish for a subdued rifle setup
Considerations & Trade-offs
- The 36mm 1.50" height and 20 MOA cant are fixed configuration choices, so it is best suited to rifles and optics that match those requirements.
- The product note calls out a potential bolt-handle interference issue on some actions with 90 degree bolt rotation when mounted in the far aft recoil slot; placement may need adjustment.
- Scope clamp torque is specified at 6.2 Nm (55 in-lbs), so installation should be done carefully and with the correct tool.
- This is a dedicated mounting system rather than a simple ring set, which may be more than needed for hunters looking for a basic, low-complexity setup.
Suggested Comparisons
- Scope rings and mounts
- Picatinny rail accessories
- Rifle scope mounting systems
Suggested Accessories
- Picatinny rail
- Scope level
- Torque wrench
- Scope caps
Frequently Asked Questions
What scope tube size is this mount made for?
This listing is for a 36mm M-BRACE scope mount.
What cant is built into the mount?
The product title identifies it as a 20 MOA scope mount.
What torque spec is provided for installation?
The listed torque spec is 6.2 Nm (55 in-lbs) on the scope clamp.
Will this mount clear every bolt handle position?
Not necessarily. The source notes that on an action with 90 degree bolt rotation, the 32mm height M-BRACE serrated interface block may interfere with the bolt handle when opened if attached to the far aft recoil slot on the Picatinny rail. Moving the mount forward one slot may avoid the issue.
Who makes this scope mount?
The manufacturer listed is American Rifle Company.